How to maintain the garden humidification pump when it is stopped

The use of the garden humidification pump is also time-limited. It is not working all the time. It needs to be maintained when it is shut down so that the follow-up work can be completed smoothly.

The use of the water pump should comply with the provisions of the equipment documents, and the correct operation steps should be taken when the machine is stopped. Close the valve of the discharge pipeline, wait for the axial flow pump to stop rotating. If the ambient temperature is low, the liquid in the water pump should be discharged to avoid damage to the machine accessories and frost cracking.

If there is a problem with the garden humidification pump and it needs to stop running, for example, when the axial flow pump is running, the connection part of the machine is loose, then it will stop running, and it needs to be detected and repaired. In case of abnormal vibration or sound during operation, stop the machine immediately for inspection. If the water level is lower than the specified water level, it is also necessary to stop the machine for inspection, and continue to work after confirming that there is no problem.