Details of water pump installation of car wash

The water pump of car washer is mainly used in the car washing industry. You can understand the use occasion from its name. This type of water pump is not large in volume, and it is very convenient to install. No matter how simple it is, you have to do a good job in details. Details determine success or failure. Only by solving the problem from the root can you ensure the safe use of the water pump.

When installing the water pump of the car washer, find a horizontal place and check whether the base and anchor bolt holes are loose. The concentricity of the motor shaft should be strictly checked during the assembly of the motor and the base to ensure that it is on the same axis. During the assembly, the axial clearance of the end face of the coupling between the multi-stage centrifugal pump and the motor should be 3mm. The installation of water pumps is different. Each type has its own advantages, and the installation is slightly different, but the difference is not big. If you master the installation of one type of water pump, the other is basically not a big problem. The key is its details. It is the key to truly ensure the correct installation of each type of water pump.