Problems needing attention in maintenance of garden humidification pump

Maintenance is a necessary process when using the garden humidification pump. Maintenance every other period of time can prolong its service life and improve its quality.

Start with the installation of garden humidification pump and operate it in strict accordance with the instructions. It should be noted that it is not based on experience, but also based on reality. The correct installation is related to whether it can be used smoothly in the later stage and whether the maintenance sequence in the later stage can be completed.

The maintenance is to avoid the existence of faults. If faults are found, they should be eliminated in time. The water pump cannot work with faults. If there is wear, replace it in time and add packing. The air leakage of the packing of the water pump shaft should also be handled in time. The air leakage will cause excessive consumption of the unit, cavitation and accelerate the damage of the impeller. This is the necessity of inspection.

The parts that need to be disassembled should also be disassembled for inspection. The pipeline of the water pump can be disassembled and cleaned. See the ball bearing and check the wear. If the ball is worn or there are half spots on the surface, the replacement requirements have been met.

Check whether there are cracks or small holes on the impeller and whether the impeller fixing nut is loose. These items need to be done well in the maintenance. The maintenance needs to realize its value and improve the service quality of garden humidification pump.